Troubleshooting - DAL-BO MaxiDisc Manual

Table 3
Problem
Soil is thrown too
far out to the sides,
creating a ridge.
A depression or
furrow in the soil
develops between
passes.
Outer disc pene-
trates deeper on
one side than the
other.
Side 22
MaxiDisc

Troubleshooting

Cause
 MaxiDisc is not
horizontal.
 The travel speed
is too fast.
 The angle is too
aggressive.
 Driving
closely or too far
away from the
previous pass.
 Driving
closely or too far
away from the
previous pass.
 The rear row of
discs is not ad-
justed correctly.
 Packer
roller
turnbuckles
not equal
length.
 The side wheels
are set at differ-
ent heights.
Action
 Raise the lift until the main frame
is horizontal.
 Drive slower.
 Adjust the angle.
 Drive more precisely and closer to
too
the previous pass.
 Drive more precisely and closer to
too
the previous pass.
 Set the rear row of discs more or
less aggressively.
 Adjust the turnbuckles on the
are packer roller until they have the
in same length.
 For hydraulic depth adjustment,
reset the cylinders.
 Adjust the side wheels to the same
height.