Hitching And Unhitching; Hitching; Hydraulic System - DAL-BO MaxiDisc Manual

The linkage of the MaxiDisc is manufactured in compliance with DS/ISO
730-1 category II and III.

Hitching

First mount the lift arms into the ball sockets (A). Elevate the lift and move
the hitch stand up into the transport/working position (B).



Hydraulic System

The MaxiDisc requires four double-acting hydraulic outlets.
Table 1. Hose markings


Hitching and Unhitching

Fig. 2
A
 Remember to secure the lift arms and the hitch stand with lynch pins.
 Remember to raise the hitch stand.
 Adjust the sway chains tightly until there is no slack in the lift arms.
Cylinder Colour Outlet
Wing fold Red
Wheel frame Yellow Double-acting
Angle Blue
Depth Green
 Wing fold cylinder requires a hydraulic outlet with a floating position.
 Check the hydraulic hoses for kinks or pinches.
MaxiDisc
Double-acting
Double-acting
Double-acting
B
Function
Fold wing sections
Raise and lower MaxiDisc
Adjust working angle of discs
Adjust working depth of discs
Side 13