Side Disc; Transport Locks - DAL-BO MaxiDisc Manual

Side Disc

Transport Locks

An adjustment bolt (A) on the wheel frame transport lock ensures correct
placement of the transport lock.
Transport locks
To ensure the correct setting of the transport locks (hooks), a wire tightener
has been mounted on the wire attached to the wings and to the packer roller.
The wire must be long enough that the transport locks can be disengaged, al-
lowing the side wings and the packer roller to be free, but also long enough
that the transport locks can fall down, catch and become completely engaged
on the side sections and the packer roller.
Side 18
A disc mounted on the left edge of
the MaxiDisc limits the amount of
soil being cast out by the disc in the
very front. Adjust the side disc ver-
tically by using the pin (A) accord-
ing to the working depth of the
MaxiDisc. The disc can also be
moved in a horizontal direction by
loosening the mounting bolt.
Fig. 9
A
Fig. 10
Transport lock on the packer roller
MaxiDisc
Fig. 8
Transport lock on the main frame
A