Wheels - DAL-BO MaxiDisc Manual

Wheels

Lubricate and adjust the wheel bearings once a year. Make sure that the tyre
pressure is correct (see tyre information).
Adjustment and lubrication of wheel bearings
1. Remove the hubcap.
2. Take out the split pin.
3. Tighten the castle nut 1/6 of a rotation until the hole is lined up with the
4. Replace the pin.
5. Fill the hubcap ¾ full with lubricant and reinstall.
Side 26
MaxiDisc
axle. The wheel must be able to rotate freely. There should be a little slack
in the hub when the wheel is moved from side to side. If there is a lot of
slack in the hub, repeat the process.