Fujitsu PRIMERGY Econel 200 S2 Service Supplement Manual page 27

Replacement routines
Figure 10: Disengaging the power supply unit
Ê Push the power supply unit toward the front of the server until the mounting
bracket (see arrow) disengages from the chassis.
Ê Take out the power supply unit sideward.
Figure 11: Mounting the bracket onto the new power supply unit
Ê Remove the mounting bracket from the defective power supply unit, and
mount it onto the new power supply unit (two screws).
Ê Insert the new power supply unit sideward.
Econel 200 S2
Replacing the power supply unit
Service Supplement 27