The Basic Menu; Accessing The Basic Menu; Menu Items In The Basic Menu - Fronius Symo 3.0-3-S Operating Instructions Manual

The Basic menu

Accessing the
Basic menu
The Basic menu appears.
7
8
9
Menu items in the
The Basic menu is used to set the following parameters, which are important for installing
Basic menu
and operating the inverter:
MPP Tracker 1 / MPP Tracker 2
-
-
-
-
-
44
A c c e s s C o d e
Use the "Plus" and "Minus" keys
Press the "Enter" key to open the desired menu item
Press the "Esc" key to exit the Basic menu
MPP Tracker 2: ON / OFF (MultiMPP Tracker devices only, excluding Fronius Symo
15.0-3 208)
DC operating mode: MPP AUTO / FIX / MPP USER
- MPP AUTO: normal operating status; the inverter automatically searches for the
ideal operating point
- FIX: for entering a fixed DC voltage at which the inverter will operate
- MPP USER: for entering a lower MP voltage above which the inverter will search
for its ideal operating point
Dynamic Peak Manager: ON / OFF
Fixed voltage: for entering the fixed voltage
MPPT start voltage: for entering the start voltage
Press the "Menu" key
1
The menu level appears.
Press the unassigned "Menu / Esc" key
2
5 times
"Access Code" is displayed in the "CODE" menu;
the first digit starts flashing.
Enter the code 22742: Use the "Plus" and
3
"Minus" keys
first digit of the code
Press the "Enter" key
4
The second digit flashes.
Repeat steps 3 and 4 for the second, third,
5
fourth and fifth digits of the access code un-
til...
the selected code starts flashing.
Press the "Enter" key
6
to select the desired entry
to select a value for the