Controlling The Inverter Via Demand Response Modes (Drm); Notes Regarding Dummy Devices - Fronius Symo 3.0-3-S Operating Instructions Manual

Text of the warning notices:
WARNING!
An electric shock can be fatal. Make sure that both the input side and output side of the
device are de-energised before opening the device. Wait for the capacitors to discharge (5
minutes).
Controlling the in-
IMPORTANT! To control the inverter via DRM, a Fronius DRM interface (item number
verter via De-
4,240,005) is required in the inverter.
mand Response
Installation is described in the installation instructions for the Fronius DRM interface. The
Modes (DRM)
installation instructions for the Fronius DRM interface are available at the following link on
the Fronius homepage:
Notes regarding
A dummy device is not suitable for connecting operationally to a photovoltaic system, and
dummy devices
must only ever be used for demonstration purposes.
IMPORTANT! Never connect DC cables to the DC connection sockets on a dummy de-
vice.
The connection of de-energised cables or sections of cable for demonstration purposes is
permissible.
A dummy device can be recognised by its device rating plate:
Example: Device rating plate of a dummy device
10
Dangerous electrical voltage
Wait for the capacitors to discharge.
To comply with the European Directive 2012/19/EU on Waste Electrical and Elec-
tronic Equipment and its implementation as national law, electrical equipment that
has reached the end of its life must be collected separately and returned to an
approved recycling facility. Any device that you no longer require must be re-
turned to your distributor, or you must locate the approved collection and recy-
cling facilities in your area. Ignoring this European Directive may have potentially
adverse effects on the environment and your health!
http://www.fronius.com/QR-link/4204102292