Fronius Symo 3.0-3-S Operating Instructions Manual page 21

Installation using the Solar.web App
Download the Fronius Solar.web
4
LIVE or Solar Web Pro app
Run the Fronius Solar.web app
5
The Setup wizard start page is displayed.
The technician wizard is intended for the installer and contains standard-specific settings.
Running the technician wizard is optional.
If the technician wizard is run, it is vital to note the service password that is issued. This
service password is necessary for setting the EVU Editor menu item.
If the technician wizard is not run, no specifications regarding power reduction are set.
Running the Fronius Solar.web wizards is mandatory.
Run the Fronius Solar.web wizards and follow the instructions
6
The Fronius Solar.web homepage is displayed,
or
the Fronius Datamanager 2.0 web page is displayed.
Where necessary, run the technician wizard and follow the instructions
7
Installation using a web browser
Connect the end device to the WiFi
4
access point
SSID = FRONIUS_240.xxxxx (5-8
digits)
Search for a network with the
-
name "FRONIUS_240.xxxxx"
Establish a connection to this
-
network
Enter the password 12345678
-
(Alternatively, connect the end device
and inverter using an Ethernet cable.)
Enter the following in the browser:
5
http://datamanager
or
192.168.250.181 (IP address for
WLAN connection)
or
169.254.0.180 (IP address for LAN
connection)
21