Part Two; Removing The Appliance From Its Packing Materials; Standard Accessories; Installation - Comet MP Series Use And Maintenance Manual

fi«
CAUTION
• This part of the manual is only for use by Skilled Technicians and is not meant to be used by
the end user of the pump.

1. REMOVING THE APPLIANCE FROM ITS PACKING MATERIALS

fi«
CAUTION
• Protective gloves and glasses must be worn when removing the appliance from the packing
materials to prevent injury to the hands and eyes.
• The packing materials (plastic bags, staples etc.) must not be left in reach of children, as
they are potentially dangerous.
• The packing materials must be disposed of according to current regulations in the country
where the pump is installed.
In particular, plastic bags and packaging must never be abandoned, as they are harmful to
the environment.
• After removing the appliance from the packing materials, check that no parts are missing
and check that the identification label is present and is legible.
In case of doubt, do not use the pump under any circumstance and contact the dealer.

1.1 STANDARD ACCESSORIES

Check that the pump is always complete with the following parts:
• operating and maintenance manual
• guarantee certificate
Should there be any problems, contact the dealer
fi«
CAUTION
• This operating and maintenance manual and the guarantee certificate must always accompany
the pump and the end user must make them available.

2. INSTALLATION

fi«
CAUTION
• The Skilled Technician must follow the instructions for installation in this manual; in
particular, the specifications of the motor (electric or combustion) to be used in conjunction
with the pump must comply with the operation and the construction features of the pump
(power, rotation speed, flanging, etc.) as illustrated in the technical documentation provided
by the Manufacturer.
• The machine that incorporates the pump must be constructed so that it guarantees compliance
with safety regulations laid down by European Directives. This is guaranteed if the CE mark
is present and by the Declaration of Conformity issued by the Manufacturer of the machine
that incorporates the pump.
• The pump must be installed and must be operated in a horizontal position.
• The pump must be secured so that it is stable.
• As the pump is a volumetric type, it must always be equipped with a pressure limitation/
adjustment valve.
P
ART TWO
(only for use by Skilled Technicians)
43