Address Of The Manufacturer; Use And Conservation Of This Operating And Maintenance Manual; Symbols - Comet MP Series Use And Maintenance Manual

will be denied if this is not the case.
All replaced parts become the exclusive property of the Manufacturer.
Any faults or failures which occur during or after the period of the guarantee do not imply the right
to suspend payment or to any further extension.
This guarantee does not cover the replacement of the pump and automatically becomes void should
the agreed terms of payment not be abided by.
The following are not covered by the guarantee:
• direct or indirect damage, of any type, caused by falls, incorrect use of the pump and failure to
observe regulations regarding safety, installation, operation and maintenance which are contained
in this manual and in the manual for the machine which incorporates the pump;
• damage caused by the inactivity of the pump for repairs;
• any parts which are subject to wear during normal use;
• any parts which are deemed faulty due to negligence or carelessness during use;
• damage caused by the use of non-original spare parts or accessories or not expressly authorised
by the Manufacturer, and by repairs not completed by a Skilled Technician
The guarantee becomes void should the pump, and especially its safety devices, be tampered
with and the Manufacturer is no longer liable.
The Manufacturer reserves the right to make any modification at any time which it deems necessary
to improve the product and is not liable to make these modifications to previously manufactured
products, be they delivered or under delivery.
The conditions in this section exclude any previous explicit or implicit condition.
1.2 THE ADDRESS OF THE MANUFACTURER
The address of the manufacturer of the pump is given in the "Declaration of the Manufacturer"
at the end of this part of the instruction manual.
1.3 USE AND CONSERVATION OF THIS OPERATING AND MAINTENANCE
MANUAL
The operating and maintenance manual is an integral part of the pump and must be kept in a safe
place for future reference so that it may be readily consulted in case of need.
The operating and maintenance manual contains important information for the safety of the operator
and of any people near him and for the protection of the environment.
In case of deterioration or loss, a new copy should be requested from the dealer or from an authorised
service centre.
If the pump is passed on to a third party, please make sure this operating and maintenance manual
is also given to the new owner.
We take great care when drawing up our manual. If you note any mistakes, please do inform the
Manufacturer or an authorised service centre.
The Manufacturer reserves the right to modify, update and correct this manual without notice.
It is illegal to copy this manual, even partially, without prior authorisation by the Manufacturer.

1.4 SYMBOLS

The symbol:
next to certain parts of the text, is to indicate that there is the firm possibility of injury to persons
if the relative instructions and indications are not followed.
The symbol:
next to certain parts of the text, is to indicate that there is the possibility of damaging the pump if
the relative instructions are not followed.
fi«
CAUTION
WARNING
31