Port Setup] Tab (Scx-21 Only) - Furuno SC-33 Operator's Manual

2. HOW TO SETUP THE MENU
2.5

[Port Setup] Tab (SCX-21 Only)

You can setup output data format for each serial channel (data port) on the SCX-21.
Note: The [Port Setup] tab is not used in the SC-33 and SCX-20. You can open the tab, however
all setting items are grayed out and cannot be adjusted.
Menu item
Port1 Setup/ Format
Port2 Setup/
Port3 Setup
Talker
Baud Rate
Select the data format for output data. Select the appropriate version
according to the connected equipment.
Select the talker for the output data from the SATELLITE COMPASS
Select the baud rate of the SATELLITE COMPASS
Note: When the baud rate setting is changed from 38,400 bps to 4,800
bps and communication load rate exceeds 100%, the following mes-
sage appears. In this case, adjust the output sentence settings so that
the communication load rate is 100% or less.
15
Remarks
™
™
.
.