Furuno SC-33 Operator's Manual page 11

3. Activate the executable file of the SC setting tool (file name: "SC_Setting_Tool.exe") on your
PC to show the [Select Device] dialog box.
Note: When the following message appears the first
time the SC setting tool is activated, install "Microsoft Vi-
®
sual C++ 2010 SP1 Redistributable Package (x86)".
The installer file (vcredist_x86.exe) is supplied with the
SC setting tool. For how to install, follow the on-screen
installation instructions.
Menu Item
1 Menu bar [File] menu
[Tools] menu
[Help] menu
2 Select Device
3 Equipment Identification
4 NMEA2000 Select
Driver
Select
Channel
Select Unique
Number
Select
Baudrate
1
2
3
4
5
• [Close]: Close the SC setting tool.
• [Screenshot]: Capture a screenshot of the [Select Device] dia-
log box (file format: bit map). Click [Screenshot], and the file
destination setting dialog box appears. Enter the file name and
file location where to save the screenshot.
• [Usage considerations]: Show the usage considerations for the
SC setting tool.
• [Language]: Select the display language for the guidance and
usage considerations (English or Japanese).
Note: The language for the menu items is fixed to English.
• [About]: Show the software information about the SC setting
tool.
Select the model number to be connected.
Not used. This menu item is grayed out.
Select the driver type. Driver type depends on the CAN-USB con-
verter used.
*1
• For CANUSB: Select [CanUSB.dll].
• For USBcan II and Kvaser Leaf Light HS v2 M12: Select
[KVASER.dll].
Select the channel name for CAN connection. The channel name
shown in the drop down list changes according to the CAN-USB
*1
converter used.
Set up this menu item only when you connect multiple SC setting
*1 tools in the same NMEA2000 network (setting range: [0 (Default)]
to [5 (Default)]). Be sure to assign a different number to each SC
setting tool.
Not used.
*1
1. OPERATIONAL OVERVIEW
Remarks
6
6