Siemens BT300 Applications Manual page 70

Siemens Industry, Inc. • 68
Code Parameter
P3.13.4.3 Lower limit
P3.13.4.4 Delay
Table 51: PID-2 Process Supervision.
Min Max Unit
Varies Varies Varies
0 30000 s
Siemens Application
Default ID
Process supervision is
used to supervise that the
actual value
some predefined limits. With
this function we can e.g.
Varies 1661 detect a major pipe burst and
stop unnecessary flooding.
An upper and lower limit for
the supervision range
be set, including a delay
when trigging faults.
If the desired value is not
0 1662 reached within this time a
fault or alarm is activated.
24-hour support +1-800-877-7545 (Dial 2)
Description
stays within
can