Siemens BT300 Applications Manual page 17

Keypad of the drive
2.2.4.4 Total counters
Code Parameter
V4.4.1 Energy counter
V4.4.3 Operating time
V4.4.7 Run time
V4.4.11 Power on time
Start command
V4.4.15
counter
2.2.4.5 Trip counters
Code Parameter
P4.5.1 Energy trip counter
P4.5.3 Operating time
P4.5.4 Operating time
P4.5.5 Operating time
P4.5.6 Operating time
2.2.4.6 Software info
Code Parameter
V4.6.1 Software package
V4.6.4 System load
V4.6.5 Application name
V4.6.6 Application ID
V4.6.7 Application version
24-hour support +1-800-877-7545 (Dial 2)
Table 1: Diagnostics menu, Total counters parameters.
Min Max
Table 2: Diagnostics menu, Trip counters parameters.
Min Max
Table 3: Diagnostics menu, Software info parameters.
Min Max
0 100
Unit Default
Varies 2291
y d hh:mm 2298 Control unit operating time
y d hh:mm 2293 Motor running time
y d hh:mm 2294
2295
Unit Default
Varies 2296
y d hh:mm 2299 Resettable. See P4.5.1.
y
d
hh:mm:ss
Unit Default
% 2300 Load on control unit CPU.
Siemens Industry, Inc. • 15
ID Description
Amount of energy taken
from supply network. No
reset.
Amount of time the power
unit has been powered so
far. No reset.
The number of times the
power unit has been
started.
ID Description
Resettable energy
counter.
NOTE:
The highest
energy unit shown on the
standard keypad is MW.
Should the counted
energy exceed 999.9 MW,
no unit is shown on the
keypad.
Operating time in total
years
Operating time in total
days
Operating time in hours,
minutes and seconds
ID Description
Name of application
2