RF Cascade Ports
The cascade ports share RF signal with up to 5 receivers within the same frequency band. RF cascade allows antenna signal
to be conveniently distributed for up to 10 channels without using splitters or distribution amplifiers.
Compatible Transmitters
The receiver is compatible with the following Shure transmitters:
•
AXT100 Bodypack Transmitter
•
AXT200 Frequency Diversity Handheld Transmitter
•
UR1 Bodypack Transmitter
•
UR1H Bodypack Transmitter
•
UR1M Micro-Bodypack Transmitter
•
UR2 Handheld Transmitter
•
MW2 Handheld Transmitter
•
MW3 Handheld Transmitter
Included Components
1-foot Coaxial Cascade Cable (2)
IEC AC Power Cable (1)
IEC AC Extension Cable (1)
Shielded 3-foot Ethernet Cable (1)
Shielded 8-inch Ethernet Jumper Cable (1)
Hardware Kit (1)
22-inch Coaxial Cable* (1)
33-inch Coaxial Cable* (1)
* with integrated bulkhead for front mounting antennas.
Mounting Instructions
This component is designed to fit into an audio rack.
WARNING: To prevent injury this apparatus must be securely attached to the rack.
95N2035
95A9128
95A9129
C803
C8006
90XN1371
95B9023
95C9023
Shure Incorporated
5/22