Safety Instructions; General; What Previous Knowledge Is Required; Functions And Features - IFM Electronic ecomot 300 AC1353 Supplementary Device Manual

Safety instructions

General

2 Safety instructions
In this chapter you can find general safety instructions such as:

General rules

Required previous knowledge

Safety instructions for mounting and installation

When are you allowed to use this device and when not?
2.1 General
 separate basic instructions of the device manual
No characteristics are warranted with the information, notes and examples provided in this manual.
The drawings, representations and examples imply no responsibility for the system and no application-
specific particularities.
The manufacturer of the machine/equipment is responsible for the safety of the machine/equipment.
WARNING
Property damage or bodily injury when the notes in this manual are not adhered to!
ifm electronic assumes no liability for this.
► The acting person must have read and understood the safety instructions and the corresponding
chapters of this manual before performing any work on or with this device.
► The acting person must be authorised to work on the machine/equipment.
2.2

What previous knowledge is required?

These instructions are for persons with knowledge and previous knowledge of control technology and
PLC programming with IEC 61131-3 as well as the CoDeSys® software.
The manual is intended for persons authorised to mount, connect and set up the controller e according
to the EMC and low voltage directives. The controllers must be installed and put into operation by a
qualified electrician.
In case of malfunctions or uncertainties please contact the manufacturer at:  back of the instructions.
2.3

Functions and features

 separate basic instructions of the device manual
2-1