Safety instructions
General
2
Safety instructions
In this chapter you can find general safety instructions such as
•
general rules
•
required previous knowledge
•
safety instructions for mounting and installation
•
When are you allowed to use this device and when not?
2.1
General
→ separate basic instructions of the device manual
No characteristics are warranted with the information, notes and examples
provided in this manual. The drawings, representations and examples imply no
responsibility for the system and no application-specific particularities.
The manufacturer of the machine/equipment is responsible for the safety of the
machine/equipment.
Danger
Property damage or bodily injury when the notes in this manual are not adhered to!
ifm electronic
► The acting person must have read and understood the corresponding chapters
of this manual before performing any work on or with this device.
► The acting person must be authorised to work on the machine/equipment.
2.2
What previous knowledge is required?
This manual is intended for persons with knowledge of control technology and PLC
programming with IEC 61131-3 as well as the CoDeSys® software.
The manual is intended for persons authorised to mount, connect and set up the
controller e according to the EMC and low voltage directives. The controllers must
be installed and put into operation by a qualified electrician.
In case of malfunctions or uncertainties please contact the manufacturer: → back
of the manual.
2.3
Functions and features
→ basic instructions of the device manual
assumes no liability for this.
2-1