Safety Instructions; 2�1 General; 2�2 Target Group; 2�3 Electrical Connection - IFM Electronic ecomot100 EC2112 Installation Instructions Manual

CANfox

2 Safety instructions

2.1 General
These instructions contain texts and figures concerning the correct handling of the
device and must be read before installation or use�
Observe the operating instructions� Non-observance of the instructions, operation
which is not in accordance with use as prescribed below, wrong installation or
incorrect handling can seriously affect the safety of operators and machinery�
2.2 Target group
These instructions are intended for authorised persons according to the EMC and
low-voltage directives� The device must only be installed, connected and put into
operation by a qualified electrician�
2.3 Electrical connection
The connections may only be supplied with the signals indicated in the technical
data and/or on the device label and only the approved accessories of ifm
electronic may be connected�
2.4 Tampering with the device
In case of malfunctions or uncertainties please contact the manufacturer�
Tampering with the device can seriously affect the safety of operators and
machinery� It is not permitted and leads to the exclusion of any liability and
warranty claims�
4