Spark Plug; Catalytic Converter - Benelli TnT302S Owner's Manual

INSPECTION& MAINTENANCE
3. Install the oil lter with the special tool and the oil drain bolt.
4. Fill the engine with quali ed engine oil
5. Start the engine and allow to run at idle for several minutes then turn it o .
6. Make sure the oil reaches the upper limit mark without any oil leakage.

SPARK PLUG

Remove any carbon deposits from the spark plug with a small wire brush or a spark plug cleaner during the
inspection period noted in the maintenance schedule. Readjust the electrode gap of the spark plug with a feeler
gauge to between 0.6～0.7mm.
Replace the spark plug every 6000km (3500mi).
Type of Spark Plug: NGK CR8E
When installing the spark plug, start threading it in by hand to avoid cross-threading it
and damaging the threads of the cylinder head. Don't let foreign objects fall into the engine
while the spark plug is removed.

CATALYTIC CONVERTER

In order to meet the requirements of the environmental emissions standards, the mu er of the
motorcycle is equipped with a catalytic converter.
35
GAP
TnT302S