Clutch Adjustment; Chain Adjustment - Benelli TnT302S Owner's Manual

INSPECTION BEFORE DRIVING

CLUTCH ADJUSTMENT

The free play of clutch is measured from the free status of the lever, to
the engagement point of the clutch, the standard should be 10~20mm.
Adjust the clutch free-play as follows, if anything abnormal.
(1) Loosen the locknut.
(2) Screw in or out the adjusting bolt to set at the required free play.
(3) Tighten the locknut.

CHAIN ADJUSTMENT

Adjust the drive chain slack every 1000km's (600mi.) using the following method to reach a slack of 10~20mm.
Regularly adjust your drive chain as needed according to your riding conditions and use.
Warning：
The chain service suggestion here is for regular maintenance, it's recommended that the chain
be checked before every ride. Damage to the engine, or your person can occur if excessive chain slack is
ignored and the chain breaks.
TnT302S
10 – 20 mm
40