Changing Gears - Benelli TnT302S Owner's Manual

RIDING TIPS
Twist the throttle grip away from you to close the throttle. When braking use both the front and rear brakes
evenly. Downshift the transmission when slowing down.
Before stopping the motorcycle, pull in the clutch lever and shift into neutral. Check that the neutral position
indicator is lit to ensure it is in the neutral position.
Notice:
Inexperienced riders usually only use the rear brake, which will accelerate the rear brake wear and result
in longer stopping distances.
Warning:
It is dangerous to only use either the front brake or the rear brake, this could result in a lack of control.
Be careful and use caution when braking on a wet or curved road.
When parking the motorcycle choose a rm and at surface. If you have to park the motorcycle on a slope with
the side stand, shift the transmission into rst gear to prevent slipping. Shift back in to neutral before starting the
engine.
Turn the ignition switch to the "
Remove the ignition switch key when parking to keep your motorcycle safe.
" position to stop the engine.
TnT302S
30