Cable Connections - Avaya 96x1 Series Application Notes
Application notes for configuring sennheiser communications a/s cehs-av 03 ehs adapter and sd wireless series headsets with avaya 96x1 series ip deskphone – issue 1.1
Hide thumbs
Also See for 96x1 Series:
- Using instructions (39 pages) ,
- Application notes (9 pages) ,
- Application notes (10 pages)
Table of Contents
Advertisement
6. Configure Sennheiser Communications A/S CEHS-AV 03
EHS Adapter and SD Wireless Series Headset
This section describes steps to configure Sennheiser Communications A/S CEHS-AV 03 adapter
and SD Wireless Series to works with Avaya 96x1 Series IP Deskphone.
6.1. Cable Connections
To connect the Sennheiser Communications A/S CEHS-AV 03 EHS adapter to the SD Wireless
Series headsets and to the Avaya 96x1 Series IP Deskphone, refer to the diagram below.
Left figure: Plug the Green and Pink end of CEHS-AV 03 adapter into the SD Wireless headset.
Right figure: Set switch 1 to the Fast Link DHSG standard position as shown in figure below to
control call via SD Wireless headset.
PM; Reviewed :
SPOC 10/7/2015
Solution & Interoperability Test Lab Application Notes
©2015 Avaya Inc. All Rights Reserved.
9 of 14
CEHS03-96x1-64
Advertisement
Table of Contents
