Elite Screens Aeon Series User Manual

Aeon Series
Fixed Frame Projection Screen
User's Guide (Z-Type)
Thank you for choosing the Aeon Series projection screen! Please read through this user guide before
utilizing the screen. Correct usage and maintenance will ensure a long product life.
Care & Use Instructions
Dust, dirt and scratches on the projection surface will affect the picture quality, please take note of the
points below to prevent that from occurring:
1. Do not touch the projection surface with your hands
2. Do not write or draw on the projection surface
3. Do not use fingers or sharp objects to point on the projection surface; this will damage the screen
material.
4. Use a soft-damp cloth to clean the projection surface; do not use chemical cleaning agents or alcohol.
5. Use clean water when dampening the cleaning cloth and do not rub against the material to clean it.

Hardware Parts List

Please make sure all parts listed below are included before proceeding with the installation.
A. Center Joints B. Spring C. Elbow Joints D. Long Screw, Short Screw &
Washer
E. Pull Hook F. Wall Bracket G. Wall Anchors, Screw & H. Tension Rods
Washer
I. Center Support Bar and J. Rubber End Cap K. Screwdriver and Rubber L. Pair of Gloves
Small screws hammer
Note: The parts listed above are subject to change without notice.
Rev. 072219-BR 1 www.elitescreens.com