LG WD1216HTE Owner's Manual page 38

How to Handle Freezing
• Make sure to empty the drum, pour warm water of
50–60 °C up to the rubber part inside the drum, close
the door, and wait for 1–2 hours.
CAUTION
• When the drain hose is installed in a curved shape,
the inner hose may freeze.
• Open the cover cap and drain tube plug used for
removal of residual water to extract water completely.
Drain tube
plug
NOTE
• If water does not drain, this means the ice is not
melted completely, or lint may be trapped inside.
38
50‒60 °C
Cover cap
• When water is removed completely from the drum,
close the drain tube plug used for removal of residual
water, choose a washing programme, and press the
Start/Pause button.
Dispenser
NOTE
• Check that water is coming into the dispenser while
rinsing, and water is draining through the drain hose
while spinning.
• When water supply problems occur, take the following
measures.
– Turn off the tap, and thaw out the tap and both
connection areas of supply hose of the product
using a hot water cloth.
– Take out supply hose and immerse in warm water
below 50–60 °C.
Supply
hose
50‒60 °C
MAX
NORMAL
Drain hose