Download  Print this page

Open Source Software Notice Information; Using The Smart Diagnosis™ Function - LG WD1216HTE Owner's Manual

Hide thumbs

Advertisement

Open Source Software Notice
Information
To obtain the source code under GPL, LGPL, MPL, and
other open source licenses, that is contained in this
product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms,
warranty disclaimers and copyright notices are available
for download.
LG Electronics will also provide open source code to you
on CD-ROM for a charge covering the cost of performing
such distribution (such as the cost of media, shipping,
and handling) upon email request to opensource@lge.
com. This offer is valid for three (3) years from the date
on which you purchased the product.
RF Radiation Exposure Statement
This equipment should be installed and operated with
minimum distance 20 cm between the radiator and your
body.
32
Using the Smart Diagnosis™
Function
Should you experience any problems with the appliance,
it has the capability of transmitting data to a smart phone
using the LG Smart ThinQ application or via the phone
to the LG Smart ThinQ call centre.
Smart Diagnosis™ can not be activated unless the
appliance is turned on by pressing the Power button. If
the appliance is unable to turn on, then troubleshooting
must be done without using Smart Diagnosis™.
Smart Diagnosis™ Using a Smart Phone
1
Open the LG Smart ThinQ application on the smart
phone.
2
Select the appliance and then the menu on upper
right side.
3
Select the Smart Diagnosis, then press Start
smart diagnosis button.
NOTE
• If the diagnosis fails several times, use the following
instructions.
4
Select the Retry or Follow Audible Diagnosis.
5
Follow the instructions on the smart phone.
6
Keep the phone in place until the tone transmission
has finished. View the diagnosis on the phone.

Advertisement

loading

  Related Manuals for LG WD1216HTE