Child Lock; Refresh Cycle - LG WD1216HTE Owner's Manual

Child Lock (

)
Select this function to lock the buttons on the control
assembly to prevent tampering.
Locking the control panel
1
Press and hold the Wash and Rinse button for 3
seconds.
2
A beep will sound, and '
display.
When the child lock is set, all buttons are locked
except the Power button.
NOTE
• Turning off the power will not reset the child lock
function. You must deactivate child lock before you
can access any other functions.
Unlocking the control panel
Press and hold the Wash and Rinse button for 3
seconds.
• A beep will sound and the remaining time for the
current programme will reappear on the display.

Refresh Cycle

1
Press the Power button.
2
Select the Refresh programme.
3
Press the Start/Pause button.
NOTE
• For better performance load 3 item or less.
When Refresh cycle finishes, laundry will continue
to be tumbled slowly for up to 30 minutes to prevent
wrinkling. You can open the door in this time by
pressing any button.
28
' will appear on the
Wi-Fi( )
Press and hold the Wi-Fi button for 3 seconds. When
Wi-Fi is turned on, the Wi-Fi icon
panel is lit.
Remote Start
Use a smart phone to control your appliance remotely.
You can also monitor your cycle operation so you know
how much time is left in the cycle.
NOTE
• You must first connect to a gateway and register your
appliance in order to use the Remote Start function.
(Refer to 'Smart Functions'.)
To use Remote Start:
1
Press the Power button.
2
Put the laundry in the drum.
3
Press and hold Remote Start button for 3 seconds
to enable Remote Start function.
4
Start a cycle from the LG Smart ThinQ application
on your smart phone.
NOTE
• The appliance cannot be used manually if the Remote
Start function is turned on. The Remote Start function
must be turned off from the app or by disabling it
directly from the unit itself before using the machine
manually.
• When Remote Start is turned on, the door is
automatically locked.
To disable Remote Start:
When the Remote Start is activated, press and hold
Remote Start button for 3 seconds.
( )
on the control