EDAN SE-12 Series User Manual page 63

SE-12 Series Electrocardiograph User ManualSystem Setup
If the printer used is not the type listed above, additional safety measures (such as
applying an isolation transformer to supply the medical system) should be taken when
the safety of the medical system has not been evaluated. If in doubt, consult our
technical service department or your local distributor.
It is forbidden to connect or disconnect a U disk or a USB printer during the transmission
course.
NOTE:
1. During the USB printing course, pressing the PRINT/STOP key again cannot stop
printing ECG reports.
2. USB printing is ineffective in the auto periodic sampling mode, manual mode, VCG
mode, and R-R analysis mode.
10.3.2 Setup 2
Items
Measure / Analysis / Diagnosis
Conclusion / Report Confirm
Template / Position Marker /
Time Scale / Minnesota Code /
Device No.
Baseline Adjustment
RR Interval List
Grid of Thermal Report
Grid of USB Report
WARNING
CAUTION
Default
On
Off
Horizontal
Off
Off
On
- 50 -
Default (Only in the U.S.)
On
Off
Horizontal
Off
Off
On