Triple Play Application - ZyXEL Communications IES-5000 Support Notes

Hide thumbs Also See for IES-5000:

Table of Contents

IES-5000 Support Notes

CI command:

TGE1> switch port pvid up1 200

TGE1> switch port pvid up2 200

TGE1> port pvc set 7-1-0/33 DEFVAL llc 10 0

TGE1> port pvc set 7-2-0/33 DEFVAL llc 20 0

1.3 Port Isolation

If we just want to isolate ports of IES-5000 and don't want to set any VLAN, there is

another easy way to do this, setup

Port isolation.

CI command:

TGE1> switch isolation enable

2. Prestige 660R-61(P791) Settings

Please refer to the procedures in previous application.

Triple play Application

The IES-5000 allows you to use different channels (also called Permanent Virtual

Circuits or PVCs) for different services. Define channels on each DSL port for

different services and assign each channel a priority, a VLAN and ATM Quality of

Service (QoS). The ATM QoS allows you to regulate the average rate and fluctuations

of data transmission. This helps eliminate congestion to allow transmission of real

time data (such as audio and video).

In this application, we demonstrate how to set up the multiple PVCs environment.

From the figure below, the PC wants to access the two kinds of network services. One

is the Internet service (data service) and the other is Video service. Because we hope

we can see the video smoothly, we need to set the video service higher priority. In

IES-5000, we can set the two services with different VLANs and assign the PVCs

with different VLAN, priority and ATM QoS. That will make the video traffic get the

higher priority than data traffic. We also can expand this application to triple play

Table of Contents