Application Notes; Provide Different Dsl Port Speeds To Different Subscribers - ZyXEL Communications IES-5000 Support Notes

Application Notes

Provide Different DSL Port Speeds to different subscribers

An ISP may provide different Line speeds for each DSL port. In our IES-5000 have
an easy way to configure the line speed for each port. It can create some profiles
which can set different parameters to meet the different users' requirement.
In this application, we will set up two profiles. One is for low speed requirement with
upstream/downstream is 2M/512Kbps and the other is for high speed requirement
with upstream/downstream is 25M/1Mbps. We suppose there are general subscribers
from port 1 to port 24 with a low speed profile and some enterprise users from port 25
to port 48 with high speed profile.
IES-5000
ALC-1248G
Port 1
xDSL
modem
2M/512K
How to apply the profile to ports
In this application, we need to configure IES-5000 and ADSL CPE. We use ZyXEL
Prestige 660R-61 CPE here.
1. IES-5000 Settings
1.1 Profiles settings
Set up Low Speed Profile. Give this profile a name like Profile_LowSpeed and input
the MaxRate for Up Stream and Down Stream. In this case, we set 512Kbps and
2048Kbps for Up Stream and Down Stream.
All contents copyright (c) 2006 ZyXEL Communications Corporation.
Internet
Uplink
Port 48
Port 24 Port 25
25M/1M
IES-5000 Support Notes
3