ZyXEL Communications IES-5000 Support Notes page 8

IES-5000 Support Notes
1. IES-5000 Settings
1.1 VLAN settings
Add VLAN10. Assign Port 1, ENET1 and ENET2 to be members of VLAN10.
CI command:
TGE1> vlan set 10 up1 fix untag
TGE1> vlan set 10 up2 fix untag
TGE1> vlan name 10 VLAN10
TGE1> port pvc vlan 7-1-0/33 10 join untag
Add VLAN20. Assign Port 2, ENET1 and ENET2 to be members of VLAN20 as
shown.
CI command:
TGE1> vlan name 20 VLAN20
TGE1> vlan set 20 up1 fix untag
TGE1> vlan set 20 up2 fix untag
TGE1> port pvc vlan 7-2-0/33 20 join untag
Add VLAN200. Assign slot 7, Port 1, Port2, ENET1 and ENET2 to be members of
VLAN200 as shown.
CI command:
TGE1> vlan name 200 VLAN200
TGE1> vlan set 200 up1 fix untag
TGE1> vlan set 200 up2 fix untag
TGE1> port pvc vlan 7-1-0/33 200 join untag
TGE1> port pvc vlan 7-2-0/33 200 join untag
1.2 PVID settings
After set up the three VLAN, then, set the PVID.
We assign VLAN 200(PVID) to ENET1, ENET2. Also, we assign VLAN 10 and
VLAN 20 to Port1 and port2, respectively as shown.
8
All contents copyright (c) 2006 ZyXEL Communications Corporation.