ZyXEL Communications IES-5000 Support Notes page 63

7. Enable the IGMP Snooping service in order to allow the Multicast traffic pass
through the ES-2024A
Click Basic Setting> Switch Setup. Then click on the Active checking Box of IGMP
Snooping.
8. Create 3 VLANs, VLAN 1 for Data access (FTP server) connected to Ethernet
port 3, VLAN 102 for Voice (SIP server & ATA) connected to the Ethernet port 1
& 2 and finally VLAN 103 for Video server connected to the Ethernet Port 4. And
the Uplink port is 24.
d. Create VLAN 1
Click Advanced Application> VLAN> Static VLAN Setting and then click on VID
1. Check the Active Box then check the Tx Tagging Box on Port 24 (for the other
ports have this option unchecked) and swith Ports 1, 2 and 4 to status 'Forbidden'.
Click Add to finish the VLAN 1 configuration.
All contents copyright (c) 2006 ZyXEL Communications Corporation.
IES-5000 Support Notes
63