ZyXEL Communications IES-5000 Support Notes page 11

Hide thumbs Also See for IES-5000:

Table of Contents

IES-5000 Support Notes

TGE1> vlan set 20 up1 fix tag

TGE1> port pvc vlan 7-1-0/33 20 join untag

1.2 VC profile setup

Add Defval_CBR VC profile for Profile Setup. Set up Encap, Class, PCR and CDVT

as shown. Encap should be LLC the same as IES-5000. Class should be CBR which

has higher priority in ATM QoS.

CI command

TGE1> profile atm set Def_CBR cbr 300000

1.3 Multiple PVCs setup

We hope VPI/VCI with 0/33 get the higher priority. We should modify this VPI/VCI

with Defval_CBR profile which we created before.

CI command:

TGE1> port pvc set 7-1-0/33 Defval_CBR llc 0 7

Then, we add the VPI/VCI with 0/34. We apply the DEFVAL profile to this channel.

CI command:

TGE1> port pvc set 7-1-0/34 Defval llc 20 0

2. Prestige 660R-61(P791) Settings

We need to set two channels. One is 0/33 and the other is 0/34. From former

application, we already knew how to set up CPE with one channel (0/33). We just

demonstrate how to set up second channel.

2.1 Menu11.1: Remote Node Profile

In menu11.1, we should activate this profile with "Active= Yes". The Encapsulation

and the Multiplexing are the same as the menu 4. Setting "Edit ATM Options=Yes"

will enter Menu 11.6.

Table of Contents