Staff; Operator; User; Expert - Cornelius UFB1 Operator's Manual

1.3

Staff

1.3.1

Operator

The operator is the natural or legal person who uses the dispensing valve or on whose behalf
the dispensing valve is used. The operator must ensure that the dispensing valve is only used
as intended, in observance of the safety instructions set out in this document.
The operator must ensure that all users read and understand the safety information. The op-
erator is responsible for the planning and proper implementation of regular safety inspections
and maintenance work.
With regard to operating the dispensing valve, Cornelius Deutschland GmbH recommends ob-
serving the national regulations of the country of use which govern the operation of beverage-
dispensing systems.
1.3.2

User

The operator specifies who will operate this dispensing valve. Cornelius Deutschland GmbH
recommends the following:
– If this dispensing valve is only to be operated by employees, they are to be instructed in
its use, demonstrate their abilities to use it to the operator or their authorised representa-
tive, and be expressly charged with its use. This document is to be available to staff at all
times.
– If this dispensing valve is openly accessible and installed so that untrained staff can use
it, the operator is to provide instructions for use directly at the base unit; these must be
clearly understood by this group of people, therefore ensuring that the unit will be handled
safely.
1.3.3

Expert

An expert in terms of this document refers to someone who has the relevant training, experi-
ence and information and knowledge of relevant standards, laws, regulations, accident pre-
vention regulations, generally accepted safety-related regulations and operating conditions to
be able to perform the required activities as well as recognise potential risks and avert them.
For assignments requiring expert knowledge, e.g. in electrical engineering, mechanics or fluid
technology, only skilled workers with the right qualifications are to carry these out.
An expert must also have received technical training in the specific special features of Corne-
lius products. The assigned tasks are always to be carried out in compliance with the relevant
installation and service manual for the dispensing valve concerned; see the document "Dis-
pensing valve installation and service manual", document no. TD2004100.
Operator manual Dispensing valve
UFB1
4
Safety
Cornelius Deutschland GmbH
Document no. TD2004000
Version 15/03/2019, Index 0