Cornelius UFB1 Operator's Manual page 22

4.1 Dispensing beverages in "TIME BASED" mode
In "TIME BASED" mode, the beverage is dispensed for a specified time according to the cup
size selected.
4.1.1 Dispensing valve UFB1 portion control
1. Place a cup on the drip tray of the base unit and under the dispensing nozzle of the dis-
pensing valve.
2. Select the beverage size that fits the set cup by pressing
the button for the required beverage size (see Fig. 12) on
the dispensing valve.
The beverage is dispensed.
3. If you would like to stop the dispensing process, press the
"Start & Stop" button (Fig. 12/3).
Dispensing stops.
Fig. 12/1 "XL" button
Fig. 12/2 "L" button
Fig. 12/3 "Start & Stop" button
Fig. 12/4 "M" button
Fig. 12/5 "S" button
4.2 Dispensing beverages in "START & STOP" mode
In "START & STOP" mode, dispensing is initiated by pressing the individual buttons or by ac-
tuating the dispensing lever of the different dispensing valves. Dispensing continues until the
button is pressed again, or until the dispensing lever is no longer actuated.
4.2.1 Dispensing valve UFB1 portion control
1. Place a cup on the drip tray of the base unit and under the dispensing nozzle of the dis-
pensing valve.
2. Press the "Start & Stop" button (Fig. 13/1).
The beverage is dispensed.
3. When the required fill quantity has been reached, press
the "Start & Stop" button (Fig. 13/1) again.
Dispensing stops.
Operator manual Dispensing valve
UFB1
20
Dispensing beverages
PGM
WAIT
5 4
3
Fig. 12
PGM
WAIT
1
Fig. 13
Cornelius Deutschland GmbH
Document no. TD2004000
Version 15/03/2019, Index 0
2 1