Cornelius UF-1 Portion Control Operation And Programming Instructions

Download this manual

OPERATION AND PROGRAMMING INSTRUCTIONS

MODULE IDENTIFICATION

The UF-1 Portion Control modules are identified by P/N 3518-300. They provide four programmable sizes plus a

"Cancel/Pour" function.

OPERATING INSTRUCTIONS

Normal Dispensing

Portion Size Buttons: To activate the UF-1 Portion Control valve, press and release any portion size button (S,M, L,

XL). The valve will dispense for the preprogrammed time.

Cancel / Pour Button: The "Cancel / Pour" button has double arrows on it. When the valve is dispensing, press and

releasing this button to cancel the programmed pour. If the valve is not dispensing when Cancel/Pour is pressed, the

valve will manually pour as long as the button is held.

DEFAULT TIME SETTINGS

The UF-1 Portion Controls are factory programmed with time values that can be useful during initial installation

and for testing the modules. The time values for each portion size are shown in the following table.

Revision Date: December 21, 2020

FOR

UF-1 PORTION CONTROL

Figure 1

Cup Icon

Initial Pour Time (sec.)

Small (S)

Medium (M)

Large (L)

Extra Large (XL)

- 1 -

2.00

3.00

4.00

6.00

Publication Number: 315222007

Revision: C

Page 1 OPERATING INSTRUCTIONS Normal Dispensing Portion Size Buttons: To activate the UF-1 Portion Control valve, press and release any portion size button (S,M, L, XL). The valve will dispense for the preprogrammed time. Cancel / Pour Button: The “Cancel / Pour” button has double arrows on it. When the valve is dispensing, press and releasing this button to cancel the programmed pour.
Page 2 ENTERING AND EXITING PROGRAM MODE Location of program mode switch and LED (See Fig. 1): The UF-1 Portion Control modules use a “hidden” program switch to enter the program mode. It is located to the right of the “Cancel/Pour” switch directly below the “XL”...