Cornelius UFB1 Operator's Manual page 24

4.2.4 Dispensing valve UFB1 OptiFill
1. Place a cup on the drip tray of the base unit and under the dispensing nozzle of the dis-
pensing valve.
2. Push the dispensing lever (Fig. 16/1) backwards with the
cup.
The beverage is dispensed.
3. When the required fill quantity has been reached, stop dis-
pensing by removing the cup from the dispensing lever
(Fig. 16/1).
Dispensing stops.
When the beverage or foam touches the dispensing lever, dis-
pensing stops automatically. Depending on the configuration
of the dispensing valve, proceed as follows:
– Configuration with top-up time
• Leave the cup under the dispensing nozzle of the
dispensing valve.
Make sure that the cup is pressing against the dis-
pensing lever.
After a brief pause, dispensing continues automati-
cally.
– Configuration without top-up time
• Remove the cup from the dispensing lever and press
it against the dispensing lever again until the fill
quantity is reached.
4.2.5 Soda dispensing (optional)
1. Place a cup on the drip tray of the base unit and under the
dispensing nozzle of the dispensing valve.
2. Press the soda lever (Fig. 17/1) down.
Soda is dispensed.
3. When the required fill quantity has been reached, stop dis-
pensing by releasing the soda lever (Fig. 17/1).
Dispensing stops.
Operator manual Dispensing valve
UFB1
22
Dispensing beverages
Fig. 16
1
Fig. 17
Cornelius Deutschland GmbH
Document no. TD2004000
Version 15/03/2019, Index 0
1