Setting Broadband Routers - Kenwood TS-590S Setting Manual

4.5. Setting Broadband Routers

If implementing KNS operations via the internet, it is necessary to set the broadband
router connected to the host station.
Make the settings to transmit control data signals transmitted via the internet from the
broadband router to the host station PC.
This setting depends on the call method of the broadband router manufacturer, and may
be "Port forwarding", "IP masquerade", "Port conversion", "NAT address conversion", etc.
Refer to the user manual for the broadband router used.
The settings are described below.
Item (Example)
Open IP address
Protocol
Port Number
Direction
Caution:
For the broadband router settings, refer to the broadband router user manual.
Incorrect broadband router settings may stop the network or enable illegal external
access to the network. Take thorough precautions when changing the settings.
Kenwood does not offer support for customer computers and networks.
Setting Details
IP address of the PC used in the host station
TCP
50000 (default value)
Two-way
17