Outline Of Host Station (Transmitter) Operations - Kenwood TS-590S Setting Manual

Fig. 3.1.2: Example of KNS configuration via the internet
The host station and remote station can be installed in any location with an internet
connection.

3.2. Outline of Host Station (Transmitter) Operations

The host station is configured using a transceiver and a PC connected to the network.
Data signals that control the transceiver are connected to the PC using either RS-232C or
USB. The computer uses its sound function to input and output audio transmitted and
received by the transceiver, and converts them between digital and analog signals.
The ARHP-590 is installed on the computer and exchanges transceiver control data
signals with the network.
The PCs are connected to the network, and trade transceiver control data signals and
transmit and receive audio with the "Remote station (operator)" on the network.
Note: To transmit and receive audio, separate VoIP software is required.
5