Setting A Broadband Router - Kenwood TS-480HX Setting Manual

4.5. Setting a Broadband Router

If implementing KNS operations via the internet, it is necessary to set the broadband
router connected to the host station.
Make the settings to transmit control data signals transmitted and audio transmissions via
the internet from the broadband router to the host station PC.
This setting depends on the call method of the broadband router manufacturer, and may
be "Port forwarding", "IP masquerade", "Port conversion", "NAT address conversion", etc.
Refer to the user's manual for the broadband router used.
The settings are described below.
Control data signals
Item (Example)
Open IP address
Protocol
Port Number
Direction
Audio transmissions
Item (Example)
Open IP address
Protocol
Port Number
Direction
Caution:
 For the broadband router settings, refer to the broadband router user's manual.
 Incorrect broadband router settings may stop the network or enable illegal external
access to the network. Take thorough precautions when changing the settings.
 JVC KENWOOD Corporation does not offer support for customer PCs and
networks.
Setting Details
IP address of the PC used in the host station
TCP
50000 (default value)
Two-way
Setting Details
IP address of the PC used in the host station
UDP
335050 (default value)
Two-way
14