Remote Station (Operator) Configuration - Kenwood TS-590S Setting Manual

3.5. Remote Station (Operator) Configuration

Transmit audio
送信音声
Receive audio
受信音声
Connection Audio
PC Specifications CPU and memory:
Sound
function
Network
function
Software OS
Run-time
ARCP-590
VoIP software To transmit and receive audio, VoIP telephone software is required.
サ ン 機能
Sound function
To exchange audio transmissions, connect the microphone and
speaker or a headset to the PC sound function. Use products
compatible with the sound function used.
Minimum values recommended by the operating system.
HDD:
To install the ARCP-590, a minimum of approx. 100 MB of free disk
space is required. If saving transceiver settings to data files, or saving
keystroke logs, additional memory space is required.
To exchange audio transmissions, a sound function is required.
A cable network is recommended.
Connect to a hub or router.
Use Windows XP (SP3 or later), Windows Vista (SP1 or later, 32-bit
version only), or Windows 7 (32-bit or 64-bit version). Other operating
systems are not compatible.
To use KNS operations on Windows XP, Microsoft .NET Framework
2.0 or later is required. If it is not installed, install it when installing
ARCP-590.
This software remote controls the transceivers. Refer to the software
help for the settings and operation methods. Download the software
from the download page, and install on the PC.
http://www.kenwood.com/i/products/info/amateur/software_download.html
(See Note 1.)
9
PC
ARCP-59
oIPソフ ア
VoIP software
LAN AN