Software Installation And Settings - Kenwood TS-590S Setting Manual

4.6. Software Installation and Settings

Install the software required for KNS operations on the host station PC and the remote
station PC, then perform the required settings.
● Host station PC
Download and install the ARHP-590 onto the PC from the Kenwood website:
http://www.kenwood.com/i/products/info/amateur/software_download.html.
Make the COM settings, network settings, optional settings, and user settings used to
connect to the TS-590S by selecting the "Tools" menu and then "Settings" in the
ARHP-590. For the settings methods, refer to the ARHP-590 help file.
To transmit and receive audio, download and install separate VoIP software.
● Remote station PC
Download and install the ARCP-590 onto the PC from the Kenwood website:
http://www.kenwood.com/i/products/info/amateur/software_download.html.
In the ARCP-590, select the "Tools" menu and then "Settings", and set the connection to
"Network". Click the "Settings" button to make the "KNS connection settings". For the
settings methods, refer to the ARCP-590 help file.
To transmit and receive audio, download and install separate VoIP software.
Caution:
Support for selecting, installing, and operating VoIP software is not available from
Kenwood Corporation.
18