Tone Frequency; Setting; Release; Automatic Telephone Number Transmission System - Kenwood TM-3530A Instruction Manual

® [indicator tights.
1) © Select the tone
frequency.
[ars _ecco Absey scm
Ito Oo
SOE | voll ee SOL pare
a0; ©: ji
% ® TONE switch ON.
@ Store in memory.
® [FT indicator will go OFF.
MEMORY CHANNEL selector
"Te wwe rm tamnscewer
wes seee— Weer ce WEL
oO
@®Q Release.
4-6-2. Tone frequency
(TM-3530A/2570A4/2550A/2530A only)
(The tone unit TU-7 option is required for this function.)
1. Setting
@ Turn the MEMORY CHANNEL selector to select the
desired memory channel.
(When in the key mode you may ignore this step.)
@ Press the TONE switch. The display will indicate the
CTCSS tone frequency, or" = ———".
@ Tum the MEMORY CHANNEL selector to select a tone
frequency from the 38 possible frequencies. The |T
indicator will light.
@To store the tone frequency into a memory channel,
press the |M|key.
{This step may be ignored when in the key mode.)
@® Press the TONE switch to return to the frequency dis-
play mode. When transmission is begun in this mode,
the tone frequency currently selected will be transmit-
ted.
Example: To store tone frequency 88.5 Hz in memory
CHS
@ Set the M.CH switch to memory mode (so that the
MEMORY CHANNEL selector is illuminated} and turn
the MEMORY CHANNEL selector to display "5S" in the
memory channel display indicator.
@ Press the TONE switch.
@ Turn the MEMORY CHANNEL selector to display
"88,5 Hz" in the tone frequency display. The [T]indi-
cator will light.
@ Press the [M] key, to complete the storage of the tone
frequency.
@ Press the TONE switch to return to normal frequency
display mode.
2. Release
® Instead of step @ above, press the [C] key or rotate
the MEMORY CHANNEL selector to display" —--—".
The [T]indicator will go OFF.
@ To release the tone frequency stored in memory,
press the [C] key.
Available CTCSS tone frequencies
4-7. AUTOMATIC TELEPHONE NUM-
BER TRANSMISSION SYSTEM
(TM-3530A/2570A/2550A/2530A
only}
®
—= KENWOOD. TH-2550A fea Pee oe EP =a
o -3 Olapoe|PAse
————, — 3))| (Cs) feade|
hero coef LL | 15 Ear
. _ Le FoaumeParenigeeven | || CO 7
f See etsy AEE ECE Ao) | vO ory SOL =
Oo wy OOo
Telephone number channe! ao
Memory channel
Telephone number channel display (Fig. 1}
KENWOOD. TM-25508,
Peele
Generel CL
[=
Testa Fu TARPSCEIVER
f a c e _ectt_AcseT sen { wort]
Oooo
Telephone number channel
First three digits entry (Fig. 2)
Tata || KENWOOD "TM-2550A,
==) [xm] [=n
Come)
7
coro|| 4557 Ba
ae
[a]
"Goo
ao J Z
=e |e
(evi)
Teeth Fi TRANSCENER,
Final four digits entry (Fig. 3)
4-7-1. Telephone number programming
@ Press the PHONE switch
The display will show "fi--" if no telephone data
has been programmed, or the reset button has been
installed.
If data has been programmed the display
will show the current telephone channel number.
@ Press the [PS] key.