Control Options; Setting The Timer - Maytag T2 Series User Manual

Oven Cooking
2. Press the appropriate number pads until
the correct time of day appears in the
display.
When electrical power is supplied or after a
power interruption, the last clock time
before power was interrupted will flash.
To recall the time of day when another time
function is showing, press the Clock pad.
Clock time cannot be changed when the
oven has been programmed for clock con-
trolled cooking, self-clean or delayed self-
clean.

SETTING THE TIMER

Use to set and then signal the completion of
a time period up to 99 hours and 59 minutes
(99:59).
The timer can be used independently of any
other oven activity and can be set while an-
other oven function is operating.
TIMER DOES NOT CONTROL THE OVEN.
1. Press Timer pad.
➢
The indicator word TIMER will flash
and "0HR:00" appears in the dis-
play.
2. Press the appropriate number pads until
the desired number of minutes or hours
and minutes appear in the display.
Example: To set the Timer for 5 min-
utes, press the Timer pad and the num-
ber 5 pad. The control will begin count-
down after a four second delay.
0 :05
HR
LOCK
DELAY COOK STOP TIMER CLEAN ROAST BROIL
Example: To set the Timer for 1 hour
and 30 minutes, press the Timer pad
and the numbers 1,3,0 pads. The con-
trol will begin countdown after a four
second delay.
1 :30
HR
LOCK
DELAY COOK STOP TIMER CLEAN ROAST BROIL
3. The last minute of the countdown will be
displayed as seconds.
7
, cont.
4. At the end of the time set, one long beep
will sound and "End" will appear in the
display. To change the number of timer
reminder signals, see below.
TO CANCEL:
1. Press and hold Timer pad for several
seconds. The time of day will reappear.
OR
2. Press the Timer pad and the "0" number
pad. After a slight delay the time of day
will reappear.
NOTE: Pressing CANCEL pad to cancel
the timer will cancel ALL selected oven
functions except the timer.

Control Options

THE
TIMER BEEPS
You have a choice of three "end of timer"
reminder signals:
Option 1: One beep at the end of the timer
operation, then, one beep every 30 seconds
for the next five minutes or until the
CANCEL pad is pressed.
Option 2: One beep at the end of the timer
operation, then, one beep every minute for
the next 12 hours or until the CANCEL pad
is pressed.
Option 3 (default option): One beep at
the end of the timer operation, then, no
other beeps.
BAKE
SETTING THE TIMER BEEPS:
1. Press the Timer and CANCEL pads at
the same time and hold for several sec-
onds.
➢
➢
2. Press the appropriate number pad (1, 2,
BAKE
or 3) to select the option you wish. The
current time of day will reappear in the
display after four seconds.
A single beep will sound.
Display will show the indicator word
TIMER and the current option – 1, 2,
or 3.
CLOCK CONTROLLED OVEN
COOKING BEEPS
You have a choice of three "end of timed
cook" reminder signals for programmed
cooking:
Option 1 (default option): Four beeps at
the end of cooking then, one beep every 30
seconds for the next five minutes or until the
CANCEL pad is pressed.
Option 2: Four beeps at the end of cooking,
then, one beep every minute for the next 12
hours or until the CANCEL pad is pressed.
Option 3: Four beeps at the end of cook-
ing, then, no other beeps.
SETTING CLOCK CONTROLLED
OVEN COOKING BEEPS:
1. Press Cook Time and CANCEL pads at
the same time and hold for several sec-
onds.
➢
A single beep will sound.
➢
Display will show the indicator word
COOK and the current option – 1, 2,
or 3.
2. Press the appropriate number pad (1, 2,
or 3) to select the option you wish. The
current time of day will reappear in the
display after four seconds.
CANCEL CLOCK DISPLAY
If you prefer that the time of day not be dis-
played when the oven is not operating:
1. Press Clock and CANCEL pads at the
same time and hold for several sec-
onds. The time of day will disappear in
the display.
2. Press Clock pad to briefly recall the
time of day, if desired. The time of day
will appear in the display for four sec-
onds.
TO RESTORE:
Press the Clock and CANCEL pads at the
same time and hold for several seconds.
The time of day will reappear in the display.