BT Vision Customer Self Install Manual page 8

Step 2 - Connect your Powerline Adapters
1. Plug one end of an
Ethernet Port 1. If you already have another device
plugged into Ethernet Port 1, please move it to
Ethernet Port 2. Plug the other end of the Ethernet
Lead into the Ethernet Socket on the bottom of one
of the Powerline Adapters.
2. Plug this
near your BT Home Hub.
3. When plugged in and switched on, the Status Light
will be red, the AP (Access Point) Light may be
orange or off.
ON/SBY
Config/
F. Reset
STATUS
Ethernet
AP
Ethernet Socket
10
Step 2 - Connect your Powerline Adapters
Ethernet Lead into yellow
Powerline Adapter into a wall power socket
Step 2 - Connect your Powerline Adapters
4. Plug the other
near to the BT Vision V-box™.
5. Connect the other supplied Ethernet Lead between
the Yellow LAN Socket
and the
Adapter. The connectors will click into place when
correctly inserted.
Configuration for Powerline
Adapters.
BT Home Hub
Ethernet Port 1
Ethernet Lead
House Mains Wiring
Powerline Adapter
Ethernet Lead
Self Install Guide Step 2 - Connect your Powerline Adapters
Powerline Adapter into a wall socket
on your BT Vision V-box™,
Ethernet Port on the nearby Powerline
Powerline Adapter
BT Vision V-box™
11