Step 3 - Connecting Your Bt Vision - BT Vision Customer Self Install Manual

Step 2 - Connect your Powerline Adapters
6. Turn the other power socket on and wait for 2
minutes while the device sets itself up. One of the
Powerline Adapters will have only a green light,
the other will have one green and one orange light
(as below).
ON/SBY
Check how things should look.
Config/
F. Reset
Both Status Lights should be
green - This indicates you
STATUS
have a good network speed.
Ethernet
AP
And one of the AP Lights will
show constant orange
(it doesn't matter which one).
Ethernet Port
If the lights on your Powerline Adapters do not
appear as described above, please refer to the
FAQ section at the back of this guide. For optimal
performance configurations for your Powerline
Adapters please see p.35 of this guide.
For full help and support please visit
www.btvision.com/help
12
Step 2 - Connect your Powerline Adapters

Step 3 - Connecting your BT Vision

ON/SBY
Config/
F. Reset
STATUS
Ethernet
AP
Ethernet Port
Self Install Guide Step 3 - Connecting your BT Vision
13