Installing Your Computer System - Jaco ULTRALITE 500 Series Manual

Installing your computer system:

The JACO 500 Series Mobile Cart will support most PCs, Thin Clients, Laptops and All-In-One computer/LCD
systems however not all systems will fit into the top bay and some systems may require too much power to
operate using our optional battery power system. It is best to review what computer system you will be
using with your local JACO Sales Representative to make sure you will not have any fit or power up issues.
To install your PC or Laptop, unlock both key-locks at the rear of the top assembly as shown in the photo
below. Both locks must be opened before the top work surface can be pulled forward and removed from
the Cart.
Once the work surface is removed, the open bay area (shown on left below) is available for installing your
computer or laptop. Route all cables needed for proper operation before installing the work surface and
locking in place for security. Shown below is an example of a PC properly installed with all cables routed
neatly and organized. If using a laptop computer, simply open, place the laptop on the internal tray and
allow the display to protrude through the opening in the work surface.
8