Basic Mobile Cart Integration & Operation; Unpacking & Assembly; Changing The Height Position - Jaco ULTRALITE 500 Series Manual

Basic Mobile Cart Integration & Operation
Unpacking & Assembly:
Your JACO Mobile Cart is delivered on a pallet and unpacking is a two person task, please plan accourdingly.
Use caution when removing and additional containers that may have shipped on top of the Mobile Cart pack.
Once unpacked, there will be minimal assembly required depending on the Mobile Cart model and options you
have ordered. Due to the shipping container, the optional LCD (520 Cart Model) and optional Scanner Mounts,
are not able to be attached at our factory. Instructions for assembly are below.

Changing the Height Position:

Your JACO Mobile Cart is height adjustable for proper ergonomics when used in a standing or sitting position.
To change the height, place the palms of your hands on the left and right sides of the work surface and on the
right side, squeeze the release lever by pulling it upward. This will free the internal locking piston and will allow
you to pull the Cart top up or push it down and offers a total of 16" of travel. Release the lever when the cart is
in the desired position.
7