Installing Scanner Mounts; Installing Keyboard And Mouse Onto The Cart; Optional Jaco Patented Trac™ Wheel Steering - Jaco ULTRALITE 500 Series Manual

Installing Scanner Mounts:

If you have ordered a Scanner Holder option, you may need to
install this as well. Remove the top work surface by unlocking
the 2 key locks at the rear Top Assembly and pulling the work
surface forward. The scanner mount will attach using 2 nuts as
shown. Use an 11/32" nut driver to tighten.

Installing Keyboard and Mouse onto the Cart:

When ordering your JACO Cart you have the option of including an
integrated mouse and keyboard. If you are adding your own mouse and
keyboard, they can be integrated as follows. It is most important that the
wires are routed out of the way of the sliding keyboard tray. With each
JACO Mobile Cart we include an accessory kit that provides ty-wraps and
Velcro pads along with other helpful items for proper cable management.
Use the Velcro pads to fasten the keyboard to the keyboard tray and use
the ty-wraps to secure the cables.
Optional JACO Patented Trac™ Wheel Steering:
The optional Trac Wheel is designed to add true steering to the JACO
Mobile Cart. With 4 swivel casters, keeping the Mobile Cart moving in
one direction may be challenging as the momentum of the Cart will want
to continue in the direction of motion. The Trac option can be engaged
by stepping down on the green post at the bottom front of the Cart. This
activates a traction wheel that will give you control over the direction of
the Cart. To disengage Trac, step down on the black post.
10