Table of Contents
Advertisement
Basic Mobile Cart Integration & Operation
Unpacking & Assembly:
Your JACO Mobile Cart may be delivered stacked with one container on top of another. Please use caution
when removing the top Cart for unpacking. This is a two person lift and the top Cart must be placed on the
ground before unpacking. Once unpacked, there will be minimal assembly required depending on the Mobile
Cart model and options you have ordered. Due to the shipping container, the 105 Cart Tablet Mount and Arm
will not be mounted and will requires some assembly. Several options will also need to be installed, see
details below.
Changing the Height Position:
Your JACO Mobile Cart is height adjustable for proper ergonomics when used in a standing or sitting position.
To change the height, place the palms of your hands on the left and right sides of the work surface and on the
right side, squeeze the release lever by pulling it upward. This will free the internal locking piston and will allow
you to pull the Cart top up or push it down and offers a total of 16" of travel. Release the lever when the cart is
in the desired position.
Installing your laptop on the 100 Cart:
Before placing your laptop on the top surface, we recommend that you install the power converter and
excess power cable in the cable management area below the top surface. To access this area, you will need
a 11/32 Nut Driver or ratchet and socket. Loosen the 4 nuts as shown below, you do not need to remove
these nuts, just loosen so that the top can slide forward and be lifted off the Cart.
6
Advertisement
Table of Contents
