Riello Array AR 3000 Installation And Operation Manual page 58

APPENDIX SHUTDOWN
Menu item Sub item / Parameter
(52) DHW Instant PID I
(53) DHW Instant PID D
(60) Flow Rate Start
(61) Flow Rate Lo Temp Pwr
(62) Flow Rate Hi Temp Pwr
(63) DHW On Off Period
(64) PreHeat Mode
(65) PreHeat Eco Setpoint
(67) PreHeat After Tap Hld Time
(68) After Tap Hold Time
(69) PreHeat Hyst Down
(70) PreHeat Hyst Up
(71) PreHeat Delay Time
(92) Fan Speed Maximum
(93) Fan Speed Minimum
(94) Fan Speed Ignition
(116) Prog. Input 1.
(117) Prog. Input 2.
(118) Prog. Input 3.
(119) Prog. Input 4.
(120) Prog. Input 5.
(121) Prog. Input 6.
(122) Prog. Input 7.
(123) Prog. Input 8.
(124) Prog. Input RT.
Range
0...1255
0...1255
0.1...20
0.1...20
0.1...20
10...60
Off, Comfort, Eco, Anti-Fr
20...60
0...255
0...255
0...30
0...30
0...15
0...12750
0...12750
0...12750
0) Disabled
1) Water pressure sensor
2) CH flow switch
3) Flue pressure switch
0) Disabled
1) DHW flow sensor
2) DHW flow switch
3) CH flow sensor
0) Disabled
1) Drain switch
2) Gas pressure switch
0) Supply 2 sensor
1) Disabled
2) Air Damper Switch
0) Disabled
1) T_Return sensor
2) Extern switch
0) Disabled
1) T_Flue sensor
2) Flue switch
3) APS switch
0) Disabled
1) T_Flue_2 sensor
2) T_Flue_2 + Bl. Flue
3) T_System sensor
4) Blocked Flue switch
5) Cascade Sensor
0) Disabled
1) T_DCW sensor
2) Water pressure switch
0) Disabled
1) Enabled
58 58
Default Value Units
160
0
1.4 l/min
1.4 l/min
1.4 l/min
30 Sec.
Off
30 °C
30 Sec.
120 Sec.
5 °C
0 °C
10 Sec.
*See Appliance
RPM
settings
*See Appliance
RPM
settings
*See Appliance
RPM
settings
*See Appliance
settings
*See Appliance
settings
*See Appliance
settings
*See Appliance
settings
*See Appliance
settings
*See Appliance
settings
*See Appliance
settings
*See Appliance
settings
1
User level
3: Factory
3: Factory
3: Factory
3: Factory
3: Factory
3: Factory
1: User
3: Factory
3: Factory
3: Factory
3: Factory
3: Factory
3: Factory
2: Installer
2: Installer
2: Installer
2: Installer
2: Installer
2: Installer
2: Installer
2: Installer
2: Installer
2: Installer
2: Installer
2: Installer